DUGi: Llistar Títols | Mecánica de fractura

Llistar Títols per Matèria "Mecánica de fractura"

S'han trobat 131 ítems

Llistant ítems des de 0 a 25:

1 2 3 4 5 6

Format	Data	Títol	Autor
Format	Data	Títol	Autor
	31 maig 2023	Accurate characterisation and modelling of the nonlinear bending behaviour of non-crimp fabrics for composite process simulations	Broberg, Peter Hede
	31 maig 2023	Adapted buckling support to investigate the compressive properties of long and thin specimen	Fiedler, Bodo
	31 maig 2023	Adhesively bonded joint shear test characterization using a modified arcan fixture	Brearley, David
	31 maig 2023	Arresting propagating kinkbands: failure mechanisms under longitudinal compression of carbon-boron fibre hybrids	Garulli, Torquato
	31 maig 2023	Assessment of cohesive law extrapolation procedure of adhesively bonded joints under different environmental conditions	Arrese Arratibel, Ainhoa
	31 maig 2023	Assessment of mode I fatigue delamination of composites through a rapid testing method	Parareda Oriol, Sergi
	31 maig 2023	Assessment of the qualities of carbon nanotube sensors for structural health monitoring of composites	Zarzoso Bueno, Moisés
	2009	Avalanche dynamics of fiber bundle models	Cruz Hidalgo, Raúl ; Kun, F. ; Kovács, K. ; Pagonabarraga Mora, Ignacio
		Avalanche dynamics of fiber bundle models	Cruz Hidalgo, Raúl ; Kun, F. ; Kovács, K. ; Pagonabarraga Mora, Ignacio
	31 maig 2023	Bayesian prediction of the load response of composite structures to streamline certification approaches	Laux, Tobias
	31 maig 2023	A bio-inspired embedded composite stiffener for improved damage tolerance	Whitehouse, Adam
	31 maig 2023	CAI fatigue testing in CFRP: is the test representing what happens in real structures?	Biagini, Davide
	31 maig 2023	Calibration of a digital twin for structural testing	Bogenfeld, Raffael
	31 maig 2023	Challenges in determination of cohesive laws from r-curves of unidirectional composites experiencing delamination damage	Bangaru, Ashish Kumar
	31 maig 2023	Characterization of a filament wound thin-ply composite for a cryogenic tank for liquid hydrogen	Olsson, Robin
		Compact tension specimen for orthotropic materials	Ortega Novillo, Adrián ; Maimí Vert, Pere ; González Juan, Emilio Vicente ; Ripoll Masferrer, Lluís
	agost 2014	Compact tension specimen for orthotropic materials	Ortega Novillo, Adrián ; Maimí Vert, Pere ; González Juan, Emilio Vicente ; Ripoll Masferrer, Lluís
	31 maig 2023	Comparison between the inter- and intra-laminar fatigue crack propagation as obtained from DCB and cross-ply specimens	Carraro, Paolo Andrea
	31 maig 2023	Compressive crack resistance analysis of unidirectional thermoplastic composites	Danzi, Federico
	26 setembre 2022	A computational micromechanics investigation of longitudinal strength in unidirectional fibre reinforced composites	Barzegar, Mostafa
	31 maig 2023	Crack density growth of high temperature cross-ply laminates subjected to elevated temperatures	Pakkam Gabriel, Vivek Richards
	2008	Critical ruptures in a bundle of slowly relaxing fibers	Kovács, K. ; Nagy, S. ; Cruz Hidalgo, Raúl ; Kun, F. ; Herrmann, H.J. ; Pagonabarraga Mora, Ignacio
		Critical ruptures in a bundle of slowly relaxing fibers	Kovács, K. ; Nagy, S. ; Cruz Hidalgo, Raúl ; Kun, F. ; Herrmann, H.J. ; Pagonabarraga Mora, Ignacio
	31 maig 2023	Damage inception of composite under dynamic loadings	Pernas-Sánchez, Jesús
	31 maig 2023	Damage sequence of impact events on 3d-printed composite laminates with quasi-static indentation test	Fernández Chamorro, Alex

1 2 3 4 5 6

DUGi

Portal de cerca conjunta als documents digitals de la UdG

Llistar Títols per Matèria "Mecánica de fractura"

Matèries

Autors